Titanvene™ HD5002GA

Titanvene™ HD5002GA is a high density polyethylene of medium molecular weight designed for extrusion applications. Titanvene™ HD5002GA is characterised by easy extrusion and processing, very low odour and fuming, high stress cracking resistance and good impact strength. Applications Titanvene™ HD5002GA is specialised extrusion application: Non-pressure pipe and conduits. Synthetic rattan Extrusion blow moulding (bottle with volume = 10 litres). Recommended Processing Conditions Titanvene™ HD5002GA can be easily processed on normal polyethylene extrusion machines at temperatures in the range of 170°C to 200°C. Food Contact Compliance Titanvene™ HD5002GA can be used in food contact applications. Please contact your nearest PT. TITAN Petrokimia Nusantara representative for more detail of food contact compliance statements for the specific grade.
General
Material Status	Commercial: Active
Availability	Asia Pacific
Features	Food Contact Acceptable Good Processability High ESCR (Stress Crack Resist.) High Impact Resistance Low Odor Medium Molecular Weight
Uses	Piping
Processing Method	Extrusion Extrusion Blow Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183/D
Melt Mass-Flow Rate (MFR)			ISO 1133
190°C/21.6 kg 2		g/10 min
190°C/5.0 kg 3		g/10 min
Environmental Stress-Cracking Resistance (10% Igepal, F50)		hr	ASTM D1693B
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress 4 (Yield)		psi	ISO 527-2/2
Tensile Strain 4 (Break)		%	ISO 527-2/2
Flexural Modulus		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength		ft·lb/in²	ISO 179/1A
Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature		°F	ISO 306
Melting Temperature (DSC) 5		°F	ISO 3146
Features
Features may also be described by the following terms: Medium Molecular Weight, Medium MW, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, High Impact Resistance, Good Processability, Easy Processing, Low Odor.
Uses
Uses may also be described by the following terms: Piping, Pipe.
Available Documents
Technical Datasheet (English)

Extrusion	Nominal Value	Unit
Melt Temperature		°F

Notes

1Typical properties: these are not to be construed as specifications.

2Condition 7

3Condition 5

4Speed C

5Method C

Tweet

Postingan terkait:

— Jumat, 07 April 2017 — Add Comment