Titanvene™ LL0335AA is a linear low density polyethylene designed for silane crosslinked low voltage power cable insulation, casting film and inner layer for rotomolding. Titanvene™ LL0335AA characterized by high speed performance, low gel content, easy extrusion.
Applications
Recommended Processing Conditions Titanvene™ LL0335AA can be easily processed on normal machines at temperatures in the range of 150°C to 220°C. Food Contact Compliance Titanvene™ LL0335AA can be used in food contact applications. Please contact your nearest PT. Lotte Chemical TITAN Nusantara representative for more detail of food contact compliance statements for the specific grade. | ||||
| General | ||||
Material Status
|
| |||
Availability
|
| |||
Features
|
| |||
Uses
|
| |||
Agency Ratings
| ||||
RoHS Compliance
| ||||
Processing Method
|
| |||
| Physical |
Nominal Value
|
Unit
|
Test Method
|
Density
|
g/cm³
| ISO 1183/D | |
Melt Mass-Flow Rate (MFR) 2 (190°C/2.16 kg)
|
g/10 min
| ISO 1133 | |
| Mechanical |
Nominal Value
|
Unit
|
Test Method
|
Tensile Stress 3 (Yield)
|
psi
| ISO 527-2/2 | |
Tensile Strain 3 (Break)
|
%
| ISO 527-2/2 | |
Coefficient of Friction 4
| BS 2782 | ||
| Films |
Nominal Value
|
Unit
|
Test Method
|
Tensile Stress 5
| ISO 1184 | ||
MD : Yield
|
psi
| ||
TD : Yield
|
psi
| ||
Tensile Elongation 5
| ISO 1184 | ||
MD : Break
|
%
| ||
TD : Break
|
%
| ||
Dart Drop Impact
|
g
| ISO 7765-1/A | |
| Thermal |
Nominal Value
|
Unit
|
Test Method
|
Melting Temperature (DSC) 6
|
°F
| ISO 3146 | |
| Electrical |
Nominal Value
|
Unit
|
Test Method
|
Volume Resistivity
|
ohms·cm
| ASTM D257 | |
Dielectric Constant
| ASTM D150 | ||
Dissipation Factor
| ASTM D150 | ||
| Optical |
Nominal Value
|
Unit
|
Test Method
|
Gloss
| ASTM D2457 | ||
Clarity
| ASTM D1746 | ||
Haze
|
%
| ASTM D1003 | |
| Features | |||
Features may also be described by the following terms: Low Gel.
| |||
| Uses | |||
Uses may also be described by the following terms: Cast Film, Low Voltage Insulation.
| |||
| Agency Ratings | |||
This plastic material has 4 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1), EU (1), FDA (2).
| |||
| Available Documents | |||
Technical Datasheet (English)
| |||
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
| 2Condition 4 |
| 3Molded Plaque, Speed C |
| 4Method 824A |
| 5Speed 1 |
| 6Method C |
—
Jumat, 07 April 2017
—
Add Comment
Belum ada tanggapan untuk "Titanvene™ LL0335AA"
Posting Komentar