Titanvene™ HD5218EA

Titanvene™ HD5218EA is an easy flow high density polyethylene suitable for thin wall injection moulding application. Titanvene™ HD5218EA is characterised by its high flow rate suitable for fast process cycle and low moulding warpage. Applications Titanvene™ HD5218EA is designed for: House wares. Thin walled containers. Toys. Recommended Processing Conditions Titanvene™ HD5218EA can be easily processed on normal polyethylene injection moulding machines at temperatures in the range of 200°C to 240°C. Food Contact Compliance Titanvene™ HD5218EA can be used in food contact applications. Please contact your nearest PT. TITAN Petrokimia Nusantara representative for more detail of food contact compliance statements for the specific grade.
General
Material Status	Commercial: Active
Availability	Asia Pacific
Features	Fast Molding Cycle Food Contact Acceptable Good Flow Low Warpage
Uses	Household Goods Thin-walled Containers Toys
RoHS Compliance
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183/D
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ISO 1133
Environmental Stress-Cracking Resistance (10% Igepal CO-630, F50)		hr	ASTM D1693B
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress 2 (Yield)		psi	ISO 527-2/2
Tensile Strain 2 (Break)		%	ISO 527-2/2
Flexural Modulus		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength		ft·lb/in²	ISO 179/1A
Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature		°F	ISO 306
Melting Temperature (DSC) 3		°F	ISO 3146
Features
Features may also be described by the following terms: Low Warpage, Low Warp, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, Good Flow.
Uses
Uses may also be described by the following terms: Household Goods, Housewares, Thin-Walled Containers, Thin-Walled Container, Thin-Wall Containers, Thin-Wall Container, Thinwall Containers, Thinwall Container.
Available Documents
Technical Datasheet (English)

Injection	Nominal Value	Unit
Processing (Melt) Temp		°F

Notes

1Typical properties: these are not to be construed as specifications.

2Speed C

3Method C

Tweet

Postingan terkait:

— Jumat, 07 April 2017 — Add Comment