Titanvene™ HD6070UA

Titanvene™ HD6070UA is a high density polyethylene copolymer with a narrow molecular weight distribution protected by a UV stabilizer for outdoor exposure. Titanvene™ HD6070UA is suitable for a wide range of injection moulding applications. Titanvene™ HD6070UA is characterised by its easy processing, high rigidity/good impact resistance and high warpage resistance. Applications Titanvene™ HD6070UA is designed for: Crates, pails and containers. Pallets, structural foam and seats. Recommended Processing Conditions Titanvene™ HD6070UA can be easily processed on normal polyethylene injection moulding machines at temperatures in the range of 200°C to 240°C. Food Contact Compliance Titanvene™ HD6070UA can be used in food contact applications. Please contact your nearest PT. TITAN Petrokimia Nusantara representative for more detail of food contact compliance statements for the specific grade.
General
Material Status	Commercial: Active
Availability	Asia Pacific
Additive	UV Stabilizer
Features	Copolymer Food Contact Acceptable Good Impact Resistance Good Processability High Rigidity Narrow Molecular Weight Distribution UV Resistant Warp Resistant
Uses	Containers Crates Pails Pallets
RoHS Compliance
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183/D
Melt Mass-Flow Rate (MFR) (190°C/21.6 kg)		g/10 min	ISO 1133
Environmental Stress-Cracking Resistance (10% Igepal CO-630, F50)		hr	ASTM D1693B
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress 2 (Yield)		psi	ISO 527-2/2
Tensile Strain 2 (Break)		%	ISO 527-2/2
Flexural Modulus		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength		ft·lb/in²	ISO 179/1A
Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature		°F	ISO 306
Melting Temperature (DSC) 3		°F	ISO 3146
Features
Features may also be described by the following terms: Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, Narrow Molecular Weight Distribution, Narrow MW Distribution, Good Impact Resistance, High Rigidity, Good Processability, Easy Processing, Warp Resistant, Warpage Resistant.
Uses
Uses may also be described by the following terms: Pallet, Pallets.
Available Documents
Technical Datasheet (English)

Injection	Nominal Value	Unit
Processing (Melt) Temp		°F

Notes

1Typical properties: these are not to be construed as specifications.

2Speed C

3Method C

Tweet

Postingan terkait:

— Jumat, 07 April 2017 — Add Comment